How to use the antminer chips fixture
News 2023年2月23日 219
This is a guide for using the new version of the test fixture. It has the same circuit and structure as the previous generation. The difference is that he will support Antminer S17+ S17e T17+ T17e. In the near future, we will configure more new miners, such as: S19 and S19pro ..
The following instructions and guidelines for using test fixtures:
First, when you open the package, you will get the following accessories:
①-Host ②-USB-TTL ③-Power adapter ④-TF program card
⑤-4p voltage regulating line ⑥-18p data line
Schematic diagram of the host interface:
①-TF card interface (TF card for loading test fixture program)
②-Ring 12V power interface (When testing single miners such as S9 T9+ S9se S9k S9j, you can use an external power adapter for power supply)
③-Test data line interface (used to connect the test fixture and hash board)
④-Voltage regulation line interface (used to connect the test fixture and the miner’s power supply, when testing the combined miner, you need to use the miner’s own power supply, please follow this guideline)
⑤-USB—TTL interface (used to connect test fixture and computer)
⑥-12V miner power connector (when testing the combined miner, you need to connect the miner’s own power supply)
Before use, you first need to configure the correct computer software and USB driver. Please use the software and programs we provide. If you use other third-party software, it may cause equipment damage or failure.
For software download and configuration tutorials, please refer to the following articles:
How to configure the test fixture
At the same time, please download the software and USB driver
After configuration, please check the connection between the test fixture and the computer
Note: First open the software, create a new connection and configure the parameters correctly, close the test fixture, plug in the USB to connect to the computer, and then turn on the power of the test fixture (combination miners need to use the miner’s own power supply to power the test fixture and connect the voltage regulator line For example S17 S15 S11 …)
